资源简介
程序完整,可运行,获得过校级第二名,可供大家借鉴
代码片段和文件信息
/******************************************************************************
FILE : datapage.c
PURPOSE : paged data access runtime routines
MACHINE : Freescale 68HC12 (Target)
LANGUAGE : ANSI-C
HISTORY : 21.7.96 first version created
******************************************************************************/
#include “hidef.h“
#include “non_bank.sgm“
#include “runtime.sgm“
#ifndef __HCS12X__ /* it‘s different for the HCS12X. See the text below at the #else // __HCS12X__ */
/*
According to the -Cp option of the compiler the
__DPAGE__ __PPAGE__ and __EPAGE__ macros are defined.
If none of them is given as argument then no page accesses should occur and
this runtime routine should not be used !
To be on the save side the runtime routines are created anyway.
If some of the -Cp options are given an adapted versions which only covers the
needed cases is produced.
*/
/* if no compiler option -Cp is given it is assumed that all possible are given : */
/* Compile with option -DHCS12 to activate this code */
#if defined(HCS12) || defined(_HCS12) || defined(__HCS12__) /* HCS12 family has PPAGE register only at 0x30 */
#define PPAGE_ADDR (0x30+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
/* Compile with option -DDG128 to activate this code */
#elif defined DG128 /* HC912DG128 derivative has PPAGE register only at 0xFF */
#define PPAGE_ADDR (0xFF+REGISTER_base)
#ifndef __PPAGE__ /* may be set already by option -CPPPAGE */
#define __PPAGE__
#endif
#elif defined(HC812A4)
/* all setting default to A4 already */
#endif
#if !defined(__EPAGE__) && !defined(__PPAGE__) && !defined(__DPAGE__)
/* as default use all page registers */
#define __DPAGE__
#define __EPAGE__
#define __PPAGE__
#endif
/* modify the following defines to your memory configuration */
#define EPAGE_LOW_BOUND 0x400u
#define EPAGE_HIGH_BOUND 0x7ffu
#define DPAGE_LOW_BOUND 0x7000u
#define DPAGE_HIGH_BOUND 0x7fffu
#define PPAGE_LOW_BOUND (DPAGE_HIGH_BOUND+1)
#define PPAGE_HIGH_BOUND 0xBFFFu
#define REGISTER_base 0x0u
#ifndef DPAGE_ADDR
#define DPAGE_ADDR (0x34u+REGISTER_base)
#endif
#ifndef EPAGE_ADDR
#define EPAGE_ADDR (0x36u+REGISTER_base)
#endif
#ifndef PPAGE_ADDR
#define PPAGE_ADDR (0x35u+REGISTER_base)
#endif
/*
The following parts about the defines are assumed in the code of _GET_PAGE_REG :
- the memory region controlled by DPAGE is above the area controlled by the EPAGE and
below the area controlled by the PPAGE.
- the lower bound of the PPAGE area is equal to be the higher bound of the DPAGE area + 1
*/
#if EPAGE_LOW_BOUND >= EPAGE_HIGH_BOUND || EPAGE_HIGH_BOUND >= DPAGE_LOW_BOUND || DPAGE_LOW_BOUND >= DPAGE_HIGH_BOUND || DPAGE_HIGH_BOUND >= PPAGE_LOW_BOUND || PPAGE_LOW_BOUND >= PPAGE_HIGH_BOUND
#error /* please adapt _GET_PAGE_REG for
属性 大小 日期 时间 名称
----------- --------- ---------- ----- ----
目录 0 2015-01-30 11:02 4sensor\
文件 1018 2013-05-11 00:40 4sensor\C_Layout.hwl
文件 161 2004-06-15 14:46 4sensor\Default.mem
文件 58561 2013-04-30 15:09 4sensor\Project1.mcp
目录 0 2013-05-14 15:54 4sensor\Project1_Data\
文件 4575 2015-01-30 11:02 4sensor\Project1_Data\CWSettingsWindows.stg
目录 0 2013-05-14 15:54 4sensor\Project1_Data\Standard\
目录 0 2013-05-14 15:54 4sensor\Project1_Data\Standard\ob
文件 136624 2013-05-11 01:07 4sensor\Project1_Data\Standard\ob
文件 5537 2013-05-11 01:07 4sensor\Project1_Data\Standard\ob
文件 13913 2013-05-11 01:07 4sensor\Project1_Data\Standard\ob
文件 81661 2013-05-14 17:03 4sensor\Project1_Data\Standard\ob
文件 507624 2015-01-30 11:02 4sensor\Project1_Data\Standard\TargetDataWindows.tdt
目录 0 2013-05-14 15:54 4sensor\Sources\
文件 22963 2013-04-26 19:29 4sensor\Sources\Start12.c
文件 2347 2013-05-09 23:58 4sensor\Sources\adc.h
文件 2891 2013-05-14 16:12 4sensor\Sources\data.h
文件 68294 2013-04-26 19:29 4sensor\Sources\datapage.c
文件 236 2013-04-30 14:15 4sensor\Sources\delay.h
文件 262 2013-04-26 19:29 4sensor\Sources\derivative.h
文件 9341 2015-01-30 11:02 4sensor\Sources\function.h
文件 3236 2013-05-02 20:02 4sensor\Sources\init.h
文件 1787 2013-05-14 16:06 4sensor\Sources\main.c
文件 819 2013-04-26 23:20 4sensor\Sources\unti
文件 0 2013-05-11 00:40 4sensor\TBDML.hwc
文件 3286 2013-05-15 04:51 4sensor\TBDML.ini
目录 0 2015-01-30 11:02 4sensor\bin\
文件 184625 2013-05-14 17:03 4sensor\bin\Project.abs
文件 9558 2013-05-14 17:03 4sensor\bin\Project.abs.glo
文件 9484 2013-05-14 17:03 4sensor\bin\Project.abs.s19
文件 132714 2013-05-14 17:03 4sensor\bin\Project.map
............此处省略12个文件信息
- 上一篇:multisim激活器
- 下一篇:很好用的CIE坐标图
相关资源
- 飞思卡尔智能车 直立组程序
- 飞思卡尔 MC9S12XEP100 App Demo用于Bootlo
- 电磁阀原理以及它的分类
- 气动 电磁阀培训教材
- 电磁信号LMV358放大模块VA
- 2018年恩智浦智能车大赛电磁组程序
- STC89C52RC 智能家居设计(GSM+人体红外
- KL26详解
- 飞思卡尔电磁车程序
- YDT 968-2010 电信终端设备电磁兼容性要
- 电磁炮模拟器
- 飞思卡尔摄像头组赛道曲率计算
- 飞思卡尔智能车光电平衡车全套代码
- 基于MC9S12XS128飞思卡尔单片机的电子闹
- 飞思卡尔DZ60底层驱动程序
- E+H电磁流量计10系列简明操作手册
- 国网单相智能电表设计
- 飞思卡尔智能车竞赛源码
- 飞思卡尔MC9S12单片机教程
- 飞思卡尔智能车直立电磁车二等奖程
- 飞思卡尔智能车摄像头组完整源代码
- 一个校三等奖的飞思卡尔程序
- ansoft maxwell 电感计算
- 飞思卡尔128 MPU6050程序
- MT大地电磁一维正演计算
- csamt可控源电磁法一维正演计算
- GB T 17619-1998机动车电子电器组件的电
- 瞬变电磁法在山西余吾煤矿水害因素
- 次级粘合薄磁的直线平板电磁阻尼器
- 论文研究 - 减少大地电磁反演不确定
评论
共有 条评论